Vault - Pendant
Material: Profile in extruded aluminium. Diffuser in opal acrylic glass.
Block in die-cast solid metal.
Installation: Vault single and system luminaires consist of blocks (pendant units) that is suspended in a 4 m steel wire, height adjustable.
There are three different kind of blocks; "Power block" is delivered with connection cable and driver, "Link block" enables electrical thorugh wiring and "Block" only has mechanical connection.
There are two different kind of light bars; "Light bar" enables electrical through wiring and "Light bar End" only has mechanical connection on one side.
From each Power block up to four "Light bars" (light units) can be connected horisentally, one light bar per side. Each Power block can power 6,2 m light bar.
Connection: Delivered with 1,8 m transparent cable on the secondary side and with 2,5 m white 5-cord connection cable with flying leads on the primary side. The driver is placed above the ceiling. For installation with fixed ceiling or if the luminaire is suspended further down than 1,8 m so that the driver is visible a driver box is available as an accessory.
Diffuser: Opal acrylic glass.
Light scattering: Symmetrical omnidirectional.
Profile can be mounted in two directions, main direction of the light can be up and down or to the sides.
Light source: Inc. LED light source. Colour temperature: 3000K or 4000K.
Colour rendering: CRI 80. Chromaticity tolerance: max 3 SDCM.
Life span: L90B10 60 000hrs.
Driver: Equipped with 24V DALI driver from Tridonic. Light regulation 1-100%
Life span: 50 000hrs.
Standard finish: Profile in white RAL9016 fine texture.
Block in white RAL9016 fine texture or in graphite grey RAL7024 fine texture. The bottom of the block is always white RAL7024 fine texture.